ADGA-11
Dissolved Gas Analyzer
ADGA-11 is a system that can monitor and verify the condition of transformer through the analysis of oil vapor of insulating oil. It analyzes specific gas generated during abnormal operation of transformer and diagnose transformer condition early based on composition and amount of evolved gas through online analysis system. Gas extraction is based on Membrane / Vacuum method. Gas analysis uses the most accurate GC method and online operation is automatic independent operation up to 6 months and data storage and reading are possible. In addition, it provides functions to prevent problems such as Auto Calibration function by comparing with existing calibration value and automatic scheduling function for each step alarm.
ATS-2400 S/D
Portable Air/Odor Auto Adsorption Tube/Cartridge Sampler
The ATS-2400 is a system for automatically collecting (concentrating) samples in adsorption tubes or DNPH cartridges for precise air quality analysis. The automatic schedule (time interval) function can be used for continuously collect up to 24 samples. In addition, it is possible to collect accurate accumulation of sample amount by applying flow control function. The ATS-2400/S is a single type, which consists of 24 adsorption tubes or 24 DNPH cartridges, and ATS-2400/D is dual-type adsorption tubes and 12 DNPH cartridges. Multi-stage for 12-consecutive sampling (adsorption tube + DNPH Cartridge) is available.
AVS-550
Portable Air/Odor Bag sampler
The AVS-550 is a portable air sampling system that collects atmospheric samples easily and quickly from the origin of pollution and the origin of pollution by using the air sampling system for prompt response when it is necessary to collect atmospheric samples at various sites. By applying indirect sampling method (Lung sampling), the method specified in the Air Pollutant Process Test Standard (ES 01115, Environmental Atmospheric Sampling) can be used.
AWMS-2000
Precision Odor Measurement/Analysis Equipment
The AWMS-2000 is a monitoring system that can be installed on the analyzer by substance. It is a system capable of precise measurement through analyzer at the same time with 24-hour sensor monitoring. It is a device that supports real-time calculation of the concentration and complex odor of main odor-inducing substance in real time, and it is installed near the emission source or at the boundary of the site to confirm the occurrence of real-time odor and more detailed measurement data.
AMS-2500/3000
Automatic aerosol(malodor) sampling equipment
The AMS Series is an automatic odor sample collection system that can be operated 24-hours a day and can be collected by the method specified in the Air Pollutant Process Test Standard (ES 01115, Environmental Atmospheric Sampling). In the absence of the manager (nighttime / early morning time), if the odor value exceeds more than preset value, automatic alarm and alarm via SMS will enable to respond quickly to civil complaints of stench without replacement of samples, twice in 2500 model and three time for 3000 model can be collected.
AMS-2000
Automatic aerosol(malodor) sampling equipment
AMS-2000 is an automatic malodor sampling system that can be operated at all times and can be collected by the method specified in the Air Pollutant Process Test Standard (ES 01115, Environmental Atmospheric Sampling). In the absence of the manager (nighttime / early morning time), if the odor value exceeds more than preset value, automatic alarming and alarm via SMS will enable quick response to civil complaints for stench.